FILLER – GAS INJECTOR – VACUUM CORKER
Automatic Monoblock composed of Stainless steel:
- 6 to 16 spouts gravity filler with light depression for bottles with maximum diameter 115mm. The filling valves (patented) cut off both the wine and the gas return, excluding any contact between the inside of the tank and the environment.
The filling level changes between 30 and 80mm from the top ofthe mouth. Wine feeding from the bottom allows a natural and total emptying of the tank. The flow is adjusted by a pneumatic electrovalve.
The washing and sterilization of the tank provide the outflow from above. The filling valves have got an open position for washing and sterilization. The pedestals of the bottles are mechanical with thrust by spring and return by cam.
- The gas injector prior to corking sensibly reduces the oxygen between the wine and the cork (the injector is supplied with dummy bottle for sterilization).
- The 4140W corker closes the cork slowly to a diameter of 16mm by using 4 Stainless steel prismatic guide studs hardened, ground and polished.
It creates the vacuum in the bottle neck by a “venturi pipe” in such a way that the fast introduction of the cork would not create any pressure and avoid any risks of dripping.
The head and centering cone disassembling are very easy and quick.
Bottle enter by infeed screw.
Monoblock supplied with safety guards in accordance with CE standards.
Equipped for one type of cylindrical bottle.
Output 750 to 3,000 litres/hour
Speed 300 to 6,000 bottles/hour (INVERTER)